Introduction of Wire Drawing Machine Type

There are 3 kinds of wire drawing machines for making nails.

1. Horizontal type wire drawing machine

2.  Three in one type combined type wire drawing machine:

The
advantages of this type is that high speed high capacity,for example,it
can draw the steel wire from diameter 6.5 mm to 4 mm by one time,ie
from first unit 6.5-5.6 mm,second unit from 5.6-4.8 mm,from 4.8 -4.0
mm,after this,then discharge the wire to make nails directly.

While
if use the single type horizontal wire drawing machine,it needs 3 times
drawing,ie from 6.5-5.6 mm by one time,then discharge the wire to wire
reel,then start drawing like first time again,this will waste a lot time
and efforts.

 

Usually
1 set 3-1 type combined type wire drawing machine can meet the capacity
of 3 automatic nail making machines,while 1 set single wire drawing
machine can only meet the capacity of 1 nail making machines.At the same
time,it will need 2 more workers if using 3 sets horizontal single type
wire drawing machine.

All
these 2 kinds can draw steel wire from diameter from 6.5 mm to diameter
2.2mm,if you want smaller diameter,then you need the cistern type wire
drawing machine.

3. Water type wire drawing machine

 

Model	RLT15/450
Coiling block diamter	450 mm
Max input diameter	4.5 mm
Min output diameter	1.2 mm
Drawing speed	300 m/min
Motor	7.5 kw
Dimensions	5780×3300×1640 mm
Weight	9 tons

Send Us Inquiry to Get Quotation

---