Best Wire Processing Machine and Wire Product Making Machine Manufacture and Supplier
Whatsapp: 0086-18637275223 Email:   Skype: romiter2000


How to Buy the Right Nail


Types of Nails

Every nail used in construction has its own application and knowing how to select the right one can save you money. Nails are designed especially for materials and their intended use and choosing the right one might be the difference between a successful project or some claim in the future. Today nails are manufactured from stainless steel or steel, developed into a variety of sizes, styles and dimensions.

Nail Types

Wood, metal, masonry and gypsum all use different kinds of nails. One critical item that must be defined prior to choosing the type of nail being used is the thickness of the materials going to be nailed. Another important aspect you might want to consider is the type of use either permanent or temporary or considers if the nail is going to be installed on the exterior or it will be an interior nail. If it’s temporary some of you might think to use a screw instead of a nail, that being one of the multiple possibilities to choose from.


How to Use Common Nails

Common nails are usually classified according to their length. Common nails are weighed and sold in pounds and usually manufactured in lengths of 1 inch to 6 inches. The longer the nail the wider it gets. A nail longer than 6 inches, is called a spike. Smaller head nails are great for finishing jobs because they can be fully driven into the surface and painted over.

Common nails are used for construction and rough fastening jobs.

Where to Use Adhesive Coated Nails

Adhesive coated nails while driven can release heat from friction releasing the adhesive. Later the adhesive released from the nail friction cools, forming and hardened surface and bonds to the wood. A non-coated nail is referred to as bright.

What Type of Nails are Recommended for Roofing?

Roofing nails or clout nails are nails with a short shank and a wide flat head. They can be divided into ​smooth shank nails, ring shank and screw shank nails according to the nail shank types. They can be used to fasten shingles, roofing felt, or sheet metal to wood. Roofing nails are usually treated to prevent rusting and may also have metal, lead or plastic washers

Types of Scaffolding Nails

Scaffolding nails are double headed, one stacked on top of the other about ¼ inch or so apart, and as its name suggests, is used to build scaffolding, scenery, and other temporary structures. This type of nail is driven to the first head and the second nail is used later to pull it out.

Recommended Nails for Drywall

A drywall nail typically has a cupped head and a ringed shank. The most common lengths are 1 3/8 inch (3.74 cm) and 1 ½ inches (3.8 cm). They are available in different gauges, which indicate the diameter of the shank. The most common one is the 13 gauge nail. The ringed shank helps the hold the nail in place after it is driven through the drywall and into the stud.

Nail Head Invisible to the Eye

Finishing nails are used when the nail head must be invisible to the eye.

Finishing nails have small heads and smaller diameters than common nails. These type of nails have a barrel-shaped head with a small diameter and a dimple on top. Once the nail has been driven almost flush with the surface, the point of a nail set is placed in the dimple and the head is driven below the surface. When driving a finish nail, stop when the nail head is about 1/8 inch above the surface. Then place a nail set into the finish nail’s small indentation in the head and drive the nail under the surface.

Size and Application of Masonry Nails

Masonry nails are usually manufactured in three different types: round, square, and fluted. Masonry nails should not be used where high strength is required. Fastening to brick, stone, or reinforced concrete should be made with screws or lag bolts.

Carpet or Fabric Recommended Nails

Tack nails are available in both round and cut forms. Tack nails are used to hold carpet or fabric to wood. Upholstery tacks have decorative heads.


Company Profile

We are based in North of China and Have many year expernece for wire processing equipment. Main Product include Nail Making Machine, Rivet Nail Making Machine, Roofing Nail Making Machine, Concrete Nail Making Machine, Wire Drawing Machine, Nail Polishing Machine, Nail Galvanizing Machine, Nail Sharpener,  Wire Hanger Making Machine, Wire Spring Making MachineSteel Chain Making Machine, Bobby Pin Making Machine, Spoke Making Machine, Wire Mesh Welding Machine, Wire Mesh Weaving Machine, Wire Butt Welding Machine

Now, Our factory has export to Bangladesh, Sudan, Pakistan, Russia, Italy,  Turkey, Egypt , Mexico etc.

Send Us Inquiry to Get Quotation

Send Us Inquiry to Get Quotation

Please enter your contact information and the details you want to know about our product.

Your Name (required)

Your Email (required)





Your Message


Online Chat

Wire Forming Machine Supplier Email Wire Forming Machine Supplier Skype Wire Forming Machine Supplier Whatsapp Wire Forming Machine Supplier Telegram Wire Forming Machine Supplier Wechat
error: Alert: Content is protected !!